BOSJ OFFE Related Products
The details of the scaffolding machine
| NO. | CONTENTS |
| 1 | Scaffolding plank standing tube welding device |
| 2 | Scaffolding plank ledger welding device |
3 |
Punching Device | Full automatic punching device |
| Semi-automatic punching device |
| Manual punching device |
| Spare part:punching mould |
4 |
diagonal brace flattening &punching device | Full automatic diagonal brace flattening &punching device |
| Semi automatic diagonal brace flattening &punching device |
| Manual diagonal brace flattening &punching device |
| Spare part:punching mould |
5 |
Tube cutting machine | Auto Blade cutting Device |
| Swing saw cutting device |
| Direct saw cutting device |
| Auto direct saw cutting device |
| 6 | Auto Scaffolding plank wedling line | Auto robot welding |
| Auto robot hand welding |
| 7 | Base jack & U-head jack welding device |
| 8 | Auto scaffolding plank roll forming machine
|
1, Unit performance
The thickness of material sheet: 1.2-1.8,the product drawings need to be confirmed by buyer
The width of material: 250≤§≤520
Product speed: 0-8m/min
Occupy groud area: length 30m xwidth 3m
Total power: about 62kw
2, Equipment structure
It is composed of passived-decoiler, leveler, servo feeding machine, punching machine, roll forming machine, hydraulic cutting machine, collection table, electrical control system etc.
3, Each part main parameter:
3,1 Passived Decoiler
Decoiler: decoiler, Inner expanding type, capacity:5T
Inner diameter material roll: ¢480~¢520mm
Outter diameter material roll: ≤1500mm
3,2 Leveler
Motor: 7.5KW Frequency conversion motor
3,3 Servo Feeding machine
Drive: 4 kw Servo motor
3,4 Punching machine
punching press: JF21-110
Maximum press: 110tons
Material of mould: Material:Cr12Mov, Quenching,Hardness:HRC58-62º
Quantity of punching dies:1sets
3,5 Main Roll Forming machine
1. Working speed :8-12 m/min
2. Material thickness :1.0-1.2mm
3. Control system:PLC
4. Decoiler :5T
5. Punching :one set
6. Main roll forming rollers:16row rollers
7. Roll material:GCR15 Steel after quenching process HRC58-62℃,he chrome plating surface treatment
8. Material of the shaft and the shaft diameter:45# steel processing, shaft diameter is 70mm
9. Main machine power :18.5kw
10. Hydraulic station power:5.5kw
11. Hydraulic pressure:24Mpa
12. Scissors punching material:Cr12Mov,Quenching HRC 58-62℃
13. Length tolerance:3m±1.0mm
14. Voltage :380V, 50HZ,3 phrase
15. driving mode :chain driving mode
16. Machine size :16.5*2.2*1.6m
17. Rolling speed:12-15m/min
18. Shaft diameter:Φ76mm
19. Material of cutting:Cr12Mov with quench HRC58-62°
20. Tolerance:10m+-0.5mm
21. Hydraulic station:5.5kw
Technical Parameter
| Description | Offered Specification |
| Rolling speed | 12-15m/min |
| Rolling thickness | 1.5mm-2.0mm |
| Raw material | Galvanized steel or blank steel |
| Roller stations | About 20 stations |
| Roller material | Gcr15, Quench HRC58-62 Plated Chrome |
| Shaft diameter | Φ76mm |
| Transmission | Gearbox |
| Material of chain | 45# Advanced Steel (Diameter: 76mm), thermal refining |
| Material of cutting | Cr12Mov with quench HRC58-62° |
| Tolerance | 10m+-0.5mm |
| Hydraulic station | 5.5kw |
3,6 Hydraulic cutting
Hydraulic pressure cutting
Hydraulic pressure pump:5.5KW
Material of cutting blade: Cr12, Quenching
Hydraulic cutting quantity:1piece
3,7 Electronic controlling: PLC
Main Machine Parameter
| No. | Item | Unit | Data | Remark |
1 | Raw material | Type | | MSgalvanized sheet | |
| Strength of panel | Map | ≥350 | |
| Thickness of panel | mm | 1.2~2.0 | |
| 2 | Size | mm | See figure | |
| 3 | Speed | m/min | 6~8 | |
| 4 | Material of roller | | GCr15Hardening treatment | |
| 5 | Drive type | | Gear box | |
| 6 | Total power | kw | About 45 | |
| 7 | Electrical system | | PLC Inverter control | |
| 8 | Contour dimension(L*W*H) | m | 35X4X3.9 | |
Product Tags:
|
|
62kw Scaffolding Floor Deck Roll Forming Machine Hydraulic Cutting AC Motor Images
|
